The scene hover craft with stowage , radar etc

Just finished these hover craft from  The Scene. Mike kindly gave me some machine guns for protection and I used some of his tarpaulins  and one of the radars from his radar set.

I started off by cleaning and undercoating them, hiding the joint between hull and skirt with plastruct and adding the extra equipment.

I also masked off the upper part of the skirt and applied some textured paint, hoping to reproduce a non-slip coating. after another undercoat, black this time, I gave them an overall coat of sand after spraying the lower part of the skirts with hair spray.. i did try some camo patterns but the amount of detail on the vehicles it just looked too busy. Having worked back the sand paint on the skirts to reveal black 'rubber' under the worn areas, i masked off the  skirts and resprayed the hulls white with black pre-shading, followed by a mid green. This had  filters and  (after decals) washes applied to try and pick out he detail and give some weathering to the hovercraft..

 I particularly like the low cost of these vehicles! I'm a real tight-fist when it come to buying figures so The Scene  is a very useful company to source my transport and stowage.  Hope you like my hovercraft, thanks for looking :)

River craft for TheScene 15mm Sci-fi

Had an awesome day at Warfare yesterday; spent way too much money! Brought back some river craft for Mike at The Scene, to be tarted up before they go back into the display. I also bought a load of mercenaries on Jet bikes and two hovercraft from the same.

Anyhow, here's a step-by-step

Stage 1) Mike applied a 3-colour scheme camo.  My first job is to highlight the centre of each colour.. The craft on the left has had a tan wash applied to the centre of each brown spot.

Stage 2) Next, the light green is highlighted. The craft on the right has now received the tan highlight, but using a thinner application for a softer effect.

Stage 3) All the craft have  recieved the tan and light green highlights; now the craft in the centre recieved a mid-green highlight to the previous dark green areas. The floor bottoms of the bows get a coat of dark grey.It's taken about an hour so far..

Stage 4) The rudders are painted various shades of grey and green , looking for a good colour to help define the model. The stowage is blacked out and the barrels in the left-most craft are given a coat of leaf-green.

Stage 5) The craft are given a   thin wash of black in all the crevices, around details and in shadows.

Stage 6) The craft are given highlights along all edges and on all details using a pale pastel green. This is complete after 3 hours.

Stage 7) The  stowage is painted in various single colours so as to stand-out from and help define the craft.

Stage 8) The craft are painted in gloss varnish before some hazard markings are added to clean up and define some weak areas. These are painted over  decals to keep the hand- painted appearance. There also some danger markings on the sterns and some very-hard-to-see bio-hazard markings on the oil drums. 4 1/2 hours into the project.

Stage 9) Finally, at 5 hours from start, the final codes are added to the craft from decals and the project is finished. I hope Mike likes them!

 Thanks for looking.